Lasers Used for Hair Removal

May 24, 2009 by admin · Leave a Comment 

Laser energy, through the principle of selective photothermolysis (a process that involves selective absorption of an intense light pulse at wavelengths that are absorbed by the hair follicles, but not by the surrounding tissue), targets the pigment in the hair follicle. This causes destruction of hair follicles while sparing surrounding structures (i.e., the skin). Growing hair is more sensitive to destruction than resting hairs. Many of the lasers listed below utilize epidermal or skin cooling techniques. The effect of cooling the surface of the skin serves to minimize discomfort during treatment while increasing the effectiveness of the laser treatments.

  1. Ruby Laser (694 nm, normal mode)
      - All patients will see a growth delay of their hair. Some patients will see a permanent reduction in hair growth.
      - This laser is more effective for dark hair. Blonde and gray hairs are more resistant.
      - White hairs do not respond to treatment
      - Epilaser® (Palomar) and Epitouch® (Sharplan) are examples of ruby lasers
  2. Alexandrite Laser (755 nm, normal mode)
      - All patients will see a growth delay of their hair. Some will see a permanent reduction in hair growth.
      - It is effective for dark hair. Blonde and gray hairs are more resistant.
      - White hairs do not respond to treatment
      - It is potentially safer for darker skin than the ruby laser
      - Rapid repetition rates of the laser will reduce treatment time
      - Apogee® (Cynosure) uses a cooling gel on the skin
      - Gentlase® (Candela) uses dynamic cooling spray
  3. Pulsed Diode Laser (800nm)
      - Patients with thick or coarse hair will see a delay in hair growth. Some patients will see a permanent reduction in hair growth.
      - It is effective for dark hair. It is not effective for fine hair.
      - Potentially, it is safer for darker skin types
      - LightSheer® (Coherent) uses contact cooling
  4. Intense Pulsed Light Source (500-1200 nm)
      - It is effective for dark hair, both fine and coarse
      - It is potentially useful for darker skin types
      - Epilight® (ESC) uses cooling gel
  5. Nd:YAG Laser (1064 nm, Q-switched)
      - Permanent hair removal has not been demonstrated
      - It can temporarily remove light hairs
      - It is potentially safe for all skin types, and causes the least epidermal damage of all treatments.
      - Carbon suspension is applied to skin in some treatments
      - There is a lower risk of epidermal damage
      - Short operative times are required
      - It causes the least discomfort of all laser hair removal treatments

Using Yantra in Ayurvedic Herbalism

May 15, 2009 by admin · Leave a Comment 

Yantra simply means ‘device’ in Sanskrit, and similar to devices like radios that tune into certain frequencies, yantras both tune into and amplify very specific vibrations that are salubrious to our herbal intentions. How does this spell healing to the Ayurvedic practitioner and their client? There are many reasons but here are some to ponder.

Yantra - Good for the Herbs
The Yantra is considered to be a geometrical equivalent of a mantra, and so it is about generating or modulating vibrational energy. Since the Yantra is more static, the vibration is steady, like a standing wave ‘trapped’ or ‘channeled’ by boundaries and filters. It also tends to be precise more often than a mantra. This particular vibration enhances the power of the herbs; it is like having a Gyoto monk or a Kashi pujari personally attending the herbs and continuously chanting empowering mantras. In fact, when using mantras to empower herbs, I have found that first directing the mantra through a yantra seems to focus the power of my sankalpa (intention). As Vamadeva points out, it creates a pattern in the herbs that will more effectively hold mantras.

Because a properly made Yantra invokes a pure, non-vitiated vibration, it activates the pure activities of an herb. For instance, Ashwagandha will create more Ojas than Kapha when used with a Yantra because Ojas can be seen to be the pure form of Kapha. The same goes for Prana and Tejas. The right yantra can also make herbs more Sattvic, while another yantra, say of a Goddess like Kranti, can make the herbs Rajasic. The choices of the herbalist are not “good or bad”, but rather about which energies are preferable: sometimes it is Rajas or Tamas.

Yantra - Enhances Practitioner Herb Wisdom

The Yantra is an archetypal symbol that can trigger the ability to innately know what an herb is good for and if it is good for you. It has this power because by looking at it, certain energetic structures in our subtle bodies are activated that allow a direct link to an intuitive knowledge of the herb. In other words, when you look at a jar of herbs on which a yantra is placed, your eyes read the text under the label or visually inspect the herbs, but your third eye reads the yantra, and gets to the codes to open up a part of you that can hear what the medicine is saying. Of course, only a great Vaidya Yogi can fully do this, but I am sure it happens subtley for some and subliminally for others. Tradition is that the same exact yantra actually exists inside of us, in the patterns of certain inter-chakra nadi networks within the within.

If we are lucky and skillful, a Yantra can be programmed, or requested, to gather and hold our accumulated collective efforts, thereby building the Prana of the remedy, the clinic, or the vaidya. Of course, any logo can do this, but to the extent that the yantra carries and promotes a special Shakti, it enhances above any other logos of our enterprises.

Utilizing Yantra
Respect is the key to correct use of a yantra as it is the mansion of a particular goddess embodying a cosmic principle. Since the moon significantly helps to govern the Soma in the herbs, I often will place a large Sri Yantra engraved on a Silver, Copper or Gold plate on top of the herbs and place this overnight out in the light of the full moon or during some other auspicious muhurta (moment). The Yantra can also be placed on the herb jar label. Yantras are more powerful when engraved in metal, so in India I once commissioned an artist to engrave the Sri Yantra in the metal tops of my herb jars. They were beautiful and I feel the Goddesses who empower herbs appreciate beauty and are more likely to take up residence in herbal practices and apothecaries that embrace and radiate beauty. Well made and skillfully used Yantras can promote this beauty.

It is best to practice Yantras within the whole of the tradition to fully utilize its synergy; it will not thrive when torn from its Vedic roots. Good results can be generated with the judicial use of these mystic diagrams, but like any Vedic science, the use of Yantras is best learned directly from the Yantra and from an experienced expert, and not from mere written words. In fact, to be assured that I have a great expert on my side who will rectify my mistakes and lack of skill, I almost always use Yantras that I have personally immersed into the Ganga to invoke her Divine blessings. As Ayur, the continuity aspect of consciousness, is a hologram, Yantra helps us reflect That.

by Prashanti De Jager

Skin Typing Features

May 4, 2009 by admin · Leave a Comment 

One of the fascinating features of Skin Typing is that people of different ethnic or racial backgrounds can share a Skin Type. In most instances, all people with the same Skin Type will follow the exact same treatment plan, but sometimes skin color can be a differentiating factor because of the way pigment (the factor in skin that produces color) is produced in different racial and ethnic groups.

For example, two best friends, Valerie, a medium-skintoned brunette, and Dana, a dark-skinned woman, came in for back-to back appointments. After they each took the questionnaire and tabulated their results, they were surprised to discover that they shared the same Skin Type. They were both “P,” Pigmented Skin Types, which gave both Valerie and Dana a tendency to develop pigmentation issues. And each of them did have a problem with pigmentation. That’s why they came to my office. Valerie had an area of dark skin discoloration (called melasma) on her cheek, and Dana had dark spots in areas where she had once had pimples. Although I recommended that they follow the exact same protocol and use the same kinds of products, there was one key difference. Valerie could benefit from an advanced cosmetic procedure that uses light instruments or lasers to treat pigment problems like hers, while Dana would benefit most from prescription products used daily and should not undergo laser treatment since this can cause discoloration in people with darker skin tones.

A Dermatologist’s Story

“A patient came to see me because of skin discoloration on her chin and cheeks. An African-American with oily skin, Sylvia never guessed that the skin scrub she’d picked up at the Neiman Marcus beauty department was causing this problem. Anyone with highly pigmented skin (like many dark skinned people) must stay away from all ingredients and procedures that cause inflammation. Yet, not knowing her SkinType, Sylvia had no idea that her choice of skin product stimulated the inflammatory response, which in turn led to dark spots. I taught Sylvia what to look for on product ingredient labels. Common ingredients, like vitamin C, AHA, and alpha lipoic acid, can create inflammation, as do buff pu ffs and strong scrubs. She was surprised to learn that hair removal formulas, like Nair, and hot wax products may also cause inflammation. In using wax or a chemical depilatory to remove facial hair, Sylvia wound up with unsightly dark patches that looked far worse than the hair she was trying to remove. Now she knew to avoid them. Once she became aware of the needs of her Skin Type, she was able to make changes that helped reduce the dark spots considerably. In addition, I recommended she use products containing oatmeal, feverfew, chamomile, or licochalone, which are known to have anti-inflammatory properties.” Dr. Leslie Baumann, M.D.